| Customization: | Available |
|---|---|
| After-sales Service: | Available |
| Warranty: | 12 Month |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
ITEM |
PARAMETER |
|
Vehicle |
Fuel tank trailer |
|
Overall dimension |
11800 x 2490 x 3800 mm |
|
Capacity |
45 m3 |
|
Compartment |
4 units |
|
Structure |
6 mm carbon steel in tank, 6 mm frame, with walkway and pneumatic operation hand rail on the top of the tank |
|
Axle |
13 ton BPW brand, 150 x 150, 3 units |
|
Suspension |
Spring suspension (option air suspension), with lift device on front axle |
|
King pin |
JOST 2", bolt on type |
|
Tire |
Hankook 365/65R22.5, 12 units (single tire available, 6 units total) |
|
Rim |
Aluminum alloy, 11.75-22.5, 6 units |
|
Braking system |
Gladhand valve, Wabco relay valve, 30/30 double brake chambers on rear axle, 30 single chambers on other axles |
|
Electrical system |
Dual circuit, 7-way split pin receptacle plug, LED light |
|
ABS |
Wabco |
|
Painting |
Mirror surface around tank(for Aluminum alloy material) |
|
Mudguard |
Plastic or steel |
|
Remak |
One manhole each compartment, Europe or USA manhole and API valve, vapor recovery equipment 1 tool box, 1 wheel carrier, excluding spare wheel |
The semi-trailer tanker is divided into two parts, the tank part and the skeleton or the running part supporting the tank body.
The rear part of the semi-trailer tanker is roughly the same, with the rear double bridge (two axes) and the rear three bridges (three axes), and the traction head is selected as needed. Usually referred to as the semi-trailer tanker by the brand of the traction head
Semi-trailer tanker
Semi-trailer tanker
Semi-trailer tank body
1. The tank body is made of 4mm or 6mm high-quality carbon steel produced by the steel company according to national standards. The shape is divided into elliptical or square round tanks, which can hold 1-4 kinds of oil products. It can also produce heating and insulation series tanks.
2. Alcohol and chemical tankers are made of stainless steel imported from South Korea and have a thickness of 4mm-5mm.
3. All kinds of hydrochloric acid, sulfuric acid and lye tankers are made of plastic with a thickness of 12mm - 22mm.
4. There are multiple anti-wave separators in the tank. The high-pressure gas leak detection is used to make the tank have high strength, stable center of gravity, and safe and stable vehicle transportation.
5. According to the tanker's use, centrifugal pump, gear pump and stainless steel pump can be selected, which have the characteristics of large flow and fast suction speed.
6, tanker metering can be selected with a single count, double counting flow meter, can also be equipped with a tax-controlled computer tanker, installed 10-15 meters automatic retractable reel, with a fuel gun. Edible oils can be metered using edible oil computer meters.
){kind=link}