| Customization: | Available |
|---|---|
| Type: | Semi-Trailer |
| Load Capacity: | 30T |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Main Dimensions |
||
|
Overall Length |
11240mm |
|
|
Overall Height |
2800mm |
|
|
Tare Weight |
6800KGS |
|
|
Loading Capacity |
45m3 |
|
|
Photo only for reference, final product can be made according to exact requirements |
||
|
Tank Body |
||
|
Shape |
Mono block Cylinder |
|
|
Total Volume(m3) |
42CBM 45cbm 50cbm 55cbm 42000L 45000L 50000L 55000L |
|
|
Tanker Body Material |
carbon steel |
|
|
End plate |
carbon steel |
|
|
Manhole cover |
Aluminum alloy API manhole cover, 4 sets with 4 breather valves |
|
|
Bottom Valve |
4 sets of carbon steel API Pneumatic Bottom Valve |
|
|
Discharging valve |
4 set discharging valves |
|
|
No.of Compartment |
4 |
|
|
Discharging Pipe |
4"rubber hose, 2 pcs, 6m long |
|
|
Chassis |
||
|
Main Beams |
Special design I beam, connected by bolts and nuts with tanker body, removable from tanker body for separate transportation; |
|
|
Axle |
3 axles |
|
|
L1 13 Ton, BPW, FUWA Brand is optional. |
||
|
Landing Gear |
JOST brand Two-speed, manual operating, heavy duty landing gear |
|
|
King Pin |
JOST brand 2" bolt-in king pin |
|
|
Suspension |
German design heavy duty mechanical suspension |
|
|
Pneumatic Braking System |
WABCO RE 6 relay valve; T30/30+T30 Spring brake chamber; 45L air tanks. |
|
|
Wheel rim |
8.25R22.5 wheel rim, 13 pieces |
|
|
Tire |
11R22.5 tubeless tire with one spare tire, 13 pieces |
|
|
Painting |
Complete Chassis sand blasting to clean rust, 1 coat of anticorrosive prime, 2 coats of final paint |
|
|
Accessories |
One standard tool box |
|
The semi-trailer tanker is divided into two parts, the tank part and the skeleton or the running part supporting the tank body.
The rear part of the semi-trailer tanker is roughly the same, with the rear double bridge (two axes) and the rear three bridges (three axes), and the traction head is selected as needed. Usually referred to as the semi-trailer tanker by the brand of the traction head
Semi-trailer tanker
Semi-trailer tanker
Semi-trailer tank body
1. The tank body is made of 4mm or 6mm high-quality carbon steel produced by the steel company according to national standards. The shape is divided into elliptical or square round tanks, which can hold 1-4 kinds of oil products. It can also produce heating and insulation series tanks.
2. Alcohol and chemical tankers are made of stainless steel imported from South Korea and have a thickness of 4mm-5mm.
3. All kinds of hydrochloric acid, sulfuric acid and lye tankers are made of plastic with a thickness of 12mm - 22mm.
4. There are multiple anti-wave separators in the tank. The high-pressure gas leak detection is used to make the tank have high strength, stable center of gravity, and safe and stable vehicle transportation.
5. According to the tanker's use, centrifugal pump, gear pump and stainless steel pump can be selected, which have the characteristics of large flow and fast suction speed.
6, tanker metering can be selected with a single count, double counting flow meter, can also be equipped with a tax-controlled computer tanker, installed 10-15 meters automatic retractable reel, with a fuel gun. Edible oils can be metered using edible oil computer meters.
){kind=link}