| Customization: | Available |
|---|---|
| Type: | Self-propelled |
| Certification: | ISO9000, CCC |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Factory introduction:
specification of FAW 10T 9T 8T 1.5M 3M Snow Melting Sprayer Vehicle with snow shovel
| Truck Parameter | ||
| Model | CLW5160TCXD5CLW5160TCXD5 | |
| Dimension | L(mm) | 8650,8850,9250,10000 |
| W(mm) | 2500 | |
| H(mm) | 3150 | |
| Chassis model | EQ1110/DFL1120 | |
| GVW(kg)/ | 4495 | |
| Curb weight(kg) | 4000 | |
| Wheel base(MM) | 3,950,450,047,005,100 | |
| Overhang(front/rear) | 1015/980 | |
| Engine | Engine model | B170-33/B190-33(Cummins) |
| Engine power | 170HP/190HP | |
| Type | Inter cooled , turbocharge | |
| Emission standard | Europe III | |
| Axle | Ftont | 5Ton |
| Rear | 8T/10T | |
| Tyer | 9.00-20/10.00-20 | |
| max speed (km/h) | 90 | |
| Transmission | 8SPEED, 8F/2R | |
| Cabin | Clutch power, power steering, electronically controlled flameout, exhaust brake, air brake, adjustable steering wheel, engine tachometer, battery cover, retractor + MP3 | |
| hundred kilometers oil consumption(L/100km) | 9 | |
| Snow removal Equipment specification | ||
| Snow Shovel | size | 3000x1200x1000mm |
| working width | 2800-3000mm | |
| Shovel weight | 680kg | |
| left and right corners | ≥±30° | |
| Lift cylinder stroke | 200mm | |
| Maximum gap from ground | 300-500mm | |
| Barrier height | 140mm | |
| Snow removal thickness | ≤200 | |
| Shovel edge(thickness*Width) | 14x130 | |
| Edge material | High wear resistant steel | |
| Scrabble | High strength, high toughness, high quality carbon steel | |
| Snow melting agent dispenser | medium | Saltwater, salt, sand. |
| Structure | V type bunker | |
| Overall dimension | 5500*2050*1500 | |
| auxiliary power |
Hyundai petrol engine | |
| Transmission mode | Screw conveying or Belt transmission | |
| Tank Size | 8m3 | |
| Spaying width | 0-20M | |
| Spraying capacity | 20-150g/m2 | |
| Hydraulic pressure | ≥18(Mpa) | |
| Hydraulic flow | 80(L/min) | |
| Motor displacement | 30ml/r | |
| Discharge Dia | 480mm | |
| Working speed | 15-40km/h | |
| Control Unit | 12V--24V Liquid control valve adjustable | |
| Weight | 1870kg | |
FAW 10T 9T 8T 1.5M 3M Snow Melting Sprayer Vehicle with snow shovel
We also can sell and fix only these equipment on differnt trucks like below :
By R-R ship or bulk ship , container,flat rack ,
Q1. Quality control
A:We make quality control for each step while producing and before shipping.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
LC terms is also can be accepted .
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.DAP etc .
Q4. How about your delivery time?
A: Generally, it will take 10 to 20 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
For standard products, delivery time is as below:
Water tanker truck:7 days
Fuel tanker trailer:15-20days
Garbage truck:15 days
Sweeper road truck:25 days
Wecker truck:7-10 days
Suction sewage/Fecal truck:7-15 days
Crane truck:15 days
Refrigerator/Van truck:7-15 days
Dump truck:20 days
Concrete mixer truck:7-25 days
LPG :20-30 days
LED truck:7-15 days
(the above is left hand drive chassis ,if you need the right hand drive chassis ,delivery time is longer than Left hand drive truck,Detailed clauses are subject to contract .)
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. How to control truck quality?
A: we have Rich experience workers and engineer to control quality before and on production , we strictly followed STATE special truck technical specification and safety production specification .
We have been in this line for over 15 years, dealing with all kinds of special trucks and trailers.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,no matter where they come from.
Q9. Did you sell truck to our country before?
A:Our main market is Africa, Asia, South America , Oceania ,middle east , annual sales is around 5000units and keeping growing every year .
Q10,If you have no certificate for exporting trucks to our country , what should we do?
A:There are some regions and countries we can not export completed truck but we can make body according to your requirements and send to you , you install it on your own chassis and sell completed truck .this can help you to save cost and increase competitiveness.
){kind=link}